|
|
Grinding machines
Products:
|
Scan Combiflex 700RC
Our new model is a robust, stable machine made of steel for grinding large areas.
Our unique operating system with automatic control via a joystick gives the machine an even grinding speed. This reduces the cost of the grinding units, maintenance costs are reduced and the machine has a longer life.
We have a patented, radio controlled operating system for stable, even grinding. Radio control allows the operator to concentrate on emptying the dust separator and managing cables while the machine is working.
Our battery operation with charger is another advantage, making it easy to load and unload the machine during transport.
We have also designed the operating system and radio control ergonomically to avoid the operator being subjected to vibrations and load injury.
|
|
Scancombiflex 800
This is our newest addition to our Scancombiflex machine range.
More even grinding. Ergonomically designed. Patented operating system.
Our new model is a robust, stable machine made of steel for grinding large areas.
We have also designed the operating system ergonomically to avoid the operator being subjected to vibrations and load injury.
|
|
Scancombiflex 650
More even grinding. Ergonomically designed. Patented operating system.
Our new model is a robust, stable machine made of steel for grinding large areas.
We have also designed the operating system ergonomically to avoid the operator being subjected to vibrations and load injury.
|
|
Scancombiflex 500PD
The Scan Combiflex 500PD (power drive) is the first grinder to combine the advantages of a grinding system that features three grinding disks rotating on a larger disk rotating in the opposite direction, with the capability to grind at high disk speed and heavier machine weight.
This provides users with a very effective and strong machine for grinding concrete and stone surfaces, but the main benefit is seen when cleaning up and removing paint, coatings and contaminants from floor surfaces.
The Scan Combiflex 500PD is made entirely of steel without any fragile plastic parts. The design, featuring very robust, vulcanised disk carriers, reduces vibrations and enables the machine to follow irregularities on floor surfaces. This results in high operational reliability, without standstills and maintenance.
The Scan Combiflex 500PD is the optimal machine for grinding concrete, stone and terrazzo. The machine is very effective in removing paint, carpet glues, coatings, putties, etc. For the Scan Combiflex 500i, there is a wide range of grinding units, removal units and sand papers for varying surfaces and conditions.
|
|
ScanCombiflex 450
Here are our new model, ScanCombiflex 450.This is the perfect machine for rental , floorlayers and smaller renovating business etc.
ScanCombiflex 450 is more flexible, a bit simpler to use and much cheaper.
The efficieny is still the same as the ScanCOmbiflex 45!
With ScanCombiflex 450 you can:
· Remove lighter coatings with SC-Tiger Silver.
· Rough anf fine grinding with our different Snap-On tools.
· Dry-polish concrete and terazzo.
· Grind wodden floors.
|
|
Scancombiflex 45NS
The Scan Combiflex 45NS is the first machine in a new generation of floor grinders to combine small format with high grinding power. Despite its lightness (100 kg), it is very robust. There are no plastic parts, except the watertank, everything is made of steel, which makes it very durable and stable to operate. The design with vulcanised rings reduces vibrations and enables the machine to easily follow irregularities on floor surfaces. Single-phase power further confirms Scanmaskin's focus on user friendliness and flexibility.
The Scan Combiflex 45NS is intended for grinding concrete, stone and putty. It removes paint, carpet residues and contaminants without problem. There is a wide range of grinding units available for the machine, for varying surfaces and conditions.
|
|
Scancombiflex 45
The Scan Combiflex 45 is the first machine in a new generation of floor grinders to combine
small format with high grinding power. Despite its lightness (80 kg), it is very robust. There are no plastic parts, everything is made of steel, which makes it very durable and stable to operate. The design with vulcanised rings reduces vibrations and enables the machine to easily follow irregularities on floor surfaces. Single-phase power further confirms Scanmaskin's focus on user friendliness and flexibility.
The Scan Combiflex 45 is intended for grinding concrete, stone and putty. It removes paint, carpet residues and contaminants without problem. There is a wide range of grinding units available for the machine, for varying surfaces and conditions.
|
|
Scancombiflex 180 EG
Main Assets
Single-head grinding machine for edges and corners
• To be used with standard discs 180 mm
• Grinding head is protected by a rubber buffer
• Ideal machine for a perfect and fast finish of medium to big job sites
• Can fit all surfaces: concrete, granite, marble, stone...
• Heavy duty professional equipment in 220V, easy to
plug on every jobsite
• Easy to transport, ready to work, no need for training
• Dust free equipment (if connected to a convenient Scan Dust S 2400)
• Several optional grinding discs for an optimized use
in every specific application
|
|
Scancombiflex 270 S
Choose Scancombiflex 270S when you want to work quick and efficient with surface preparation. Scancombiflex 270S has a low maintenace cost and are therefor a cost efficient choice.
Mainly used for surface preparation and renovation.
An easy to manouver machine.
Adjusted to the Scap On system.
|
|
Scancombiflex Handyman
|
|
