Product of the month – Scan Dust 2900 & Scan Dust 3600

Purchase a Scan Dust 2900 or Scan Dust 3600 and get a 5 free packages with 20 longopac bags . The campaign is valid from today, July the 1th until July 31th 2020.

If you have any further question about our campaign contact our Marketing director Anna-Lena Lööf, anna-lena.loof@scanmaskin.com +46 707 99 87 90

Product of the month – Scan Combiflex 500i & 500PD 

Purchase a Scan Combiflex 500i or Scan Combiflex 500PD and get a free set of Razorback PCDs or World Series metals. The campaign is valid from today, June the 1th until June 30th.

If you have any further question about our campaign contact our Marketing director Anna-Lena Lööf, anna-lena.loof@scanmaskin.com +46 707 99 87 90

Scan Dust 9000 World Series – electric version and propane version

-Scanmaskin launches new dust extractors, ScanDust 9000 World Series in an electric and a propane version, at World of Concrete in Las Vegas.  As with all machines in the World Series range, extra effort has been put into efficiency, design, ergonomics and ease of service. Grinding in the fast lane, as we call it.

The ScanDust 9000 World Series is the largest and most efficient industrial dust extractor by Scanmaskin featuring increased filter capacity and built-in pre-separators. The unique and patented pre-separator separates the dust into two stages and provides up to 90% pre-separation. This means that you do not need to clean the filters as often, which provides a longer filter life and less interruptions for maintenance compared to traditional industrial dust collectors. Since the pre-separator is built into the machine, it is always included in the workplace, which means no extra equipment that needs to be handled or transported.

“We have listened to our customers, their challenges and wishes, and created an industrial vacuum cleaner that provides a significantly longer operating time and a safer working environment.” Says Anna-Lena Lööf, Marketing Director, Scanmaskin Sweden AB.

The filter area of ​​the ScanDust 9000 World Series is 4.2 m2 (45 sq/ft) and consists of 32 Teflon coated sock filters and 2 Hepa 14 filters. Hepa 14 provides an extremely high filtration rate of 99.995% and takes care of the very smallest and most dangerous particles despite a very high air flow.

The electric version of the ScanDust 9000 World Series is equipped with a frequency control drive which allows you to adjust the power and speed depending on the application. The combination of this, together with high filter capacity and high airflow, allows you to connect more machines to the same vacuum cleaner.

The ScanDust 9000 World Series has a height-adjustable cyclone for flexible transport options and is also equipped with solid rear wheels and 200 mm large swivel wheels for easy handling in the workplace. The World Series design makes service simple, as you can easily access all parts and do not need to disassemble machine to gain access.

The vacuum cleaner is equipped with a filter guard that warns you when you need to clean the filters and a Jet-Pulse cleaning system that easily pulses the filters to keep them clean without having to come in contact with the harmful dust. For simple and dust-free bag replacement, the proven Longopac bag system is incorporated into the SD9000

Scanmaskin always strives to increase sustainability and environmental consideration in our products and operations. The ScanDust 9000 World series is no exception with steel construction and 95% recyclability.

About Scanmaskin

Scanmaskin is a manufacturer of floor grinding and polishing equipment and systems. We have a wide range of grinding and polishing machines along dust extractors.

The goal of Scanmaskin is to provide high quality products that will provide the end user with reliability and ease of use. At Scanmaskin, we engineer our equipment to work – not to be worked on. We are continually working to improve our product line, and create cost effective solutions for customers. We invite you to try our products and see the difference for yourself. The way we see it, only the best is good enough.

 ScanDust 9000 will be launched worldwide on February 4, 2020 at the World of Concrete in Las Vegas. 

For more information about Scanmaskin product range and press related information please contact,
Anna-Lena Lööf, Marketing Director, anna-lena.loof@scanmaskin.com /00 46 (0) 707-99 87 90

To get access to more pictures of the machines visit our Google drive.


Today are we launching our web training. Book online to get a personalized and individual training after your needs to maximize your grinding experience. We are going to offer you the following training:

– Machine knowledge
– Diamond knowledge
– Concrete knowledge
– Polished concrete
– Grinding
– Removal

Customize your training by pick the pieces you are interested in and get the more out of your education. The training will be available in English, Swedish, Finnish and Spanish.

For booking your personalized training fill in the form under web training and we will get back to you with a confirmation about your booking. Click here to get to our form.

If you have any questions regarding the web training contact our Marketing director Anna-Lena Lööf, anna-lena.loof@scanmaskin.com, +46-707 99 87 90


Product of the month – Scanmaskin 18

When purchasing our grinding machine Scanmaskin 18 you will get a free weight kit. The campaign is valid from today, May the 4th until May 31th.

If you have any further question about our campaign contact our Marketing director Anna-Lena Lööf, anna-lena.loof@scanmaskin.com +46 707 99 87 90

Dear customer!

The safety and health of our customers and employees are always the highest priority for Scanmaskin. We follow closely the authorities’ information on the new corona virus (COVID-19) on a daily basis.

We have taken several measures in order to make our customers and employees feel secure. We have chosen to decline all supplier visits for some time to reduce the spread of infection. We have also changed and increased the hygiene routines among our employees and in our facilities. To further reduce the spread of infection, we encourage our employees to stay at home at the slightest sign of cold symptoms. We have also limited all business trips abroad in accordance with the current recommendations.

We have switched from physical to digital trainings and we will soon launch a service to book training directly from our website. We have also increased our service level with more service and quick start videos. We will continue to develop our digital knowledge bank and are happy to receive any feedback we can get.

We keep all our offices and production open as usual and are here to answer your questions, receive orders and deliver your goods. Do not forget that you can always order all our products from our website and have it delivered directly to your workplace.

We hope that we together will do what we can to reduce the spread of infection and that we all will return to a more normal business climate in the near future. If you have more questions or concerns, please do not hesitate to contact us at marketing@scanmaskin.com.

Take care and stay healthy!

Sincerely
Scanmaskin Sweden AB

pressbilderRityta 4 - WS logga (högra hörn)Lindome, Sweden 2019-01-17

Scanmaskin presents the World Series floor system – concrete polishing made easy.

When it comes to polishing a floor, there are two important things to remember. These are to set the customers’ expectations and start with the end result. Anna-Lena Lööf, Marketing Director at Scanmaskin, describes the difficulty of today – “Today there are many customers that don’t know what polished concrete is and the steps to create the expected end result. Therefore, we have chosen to create a simple step by step guide to facilitate our customers process in polishing a concrete floor.” “How to get a World Series floor”.

The World Series system is a premium selection of products that have been created for our customers’ demands all around the world. The development of this product range is focused on quality, service and reliability.  Last year we released the Scanmaskin 32 and Scanmaskin 28 machines in different versions which have been a great success, and was rewarded with the 2018 years best innovation. After much testing together with our customers, we have now also released a complete World Series tooling system including World Series Metals, World Series Ceramics and World Series Resins.

The World Series floor guide for polished concrete combines the results of our extensive testing, together with a complete range and explanation of the tooling you need for the job. The easy step-by-step guide helps you achieve the ultimate finish every time. It includes three different systems that each can be used to achieve a matte, glossy, or super glossy finish. We call them World Series Matte, World Series HF (high refinement), and World Series VHF (Very high refinement).

The World Series floor system will be first launched at the annual World of Concrete show in Las Vegas USA, 22-25th of January 2019.
 

About World Series tooling

WORLD SERIES METALS
The focus for the World Series Metal tools by Scanmaskin has been to achieve maximum productivity while providing good longevity. The ”W” shaped segments increase the airflow around the tool, which helps prevent overheating and glazing. is ensures better longevity and higher productivity for the tool. The World Series metal tools are available in four different bonds.

  • BLACK: Hard bond segments. For soft floors. Mohs scale 2-3
  • BLUE: Medium bond segments for regular floors. Mohs scale 3-5
  • GOLD: Soft bond segments for hard floors. Mohs scale 5-7
  • YELLOW: Super soft bond segment tools for super hard floors. Mohs scale 7-9

There are both single and double tools and all are available in two heights 8 mm and 12 mm and four different grits. 16/20, 30/40, 60/80, 140/150

WORLD SERIES CERAMICS
The World Series ceramic tools are specifically designed to transition from a metal diamond to a resin polishing tool. The unique low-profile design and high crystal density allow these tools to contour to the surface while achieving maximum refinement at the same time. The World Series ceramics can also be used as the first step for a cream or salt/pepper finish, eliminating the need for a metal tool. The Soft bond option works well on floors testing at 6-7+ on the Mohs scale.

  • Soft and Medium bonds for different concrete hardness
  • Very high diamond concentration
  • 2” or 3” options for small and large grinders
  • Specifically designed to transition from a metal to resin tool
  • Five grits are available: 50, 80, 100, 200, 400.

WORLD SERIES RESINS
The World Series resins are designed to achieve the final mechanical refinement on the surface, using diamond powders bonded in a resin matrix. The World Series resins are engineered to transition from a honed surface to a highly polished surface with minimal steps.

  • HIGH REFINEMENT – DOI of 55+ at the 800 grit level
  • VERY HIGH REFINEMENT – DOI of 75+ at the 1500 grit level
  • 2” or 3” options for small and large grinders
  • Specifically designed to transition from a ceramic to resin tool
  • Seven grits are available: 50, 100, 200, 400, 800, 1500, 3000.

About Scanmaskin
Scanmaskin is a dynamic, progressive organization based in Sweden. Since 1975 we have manufactured market leading floor grinding-, surface finishing and polishing equipment.  All our grinders and dust extractors are produced in our facility in Lindome, on the outskirts of Gothenburg.
The development of new models has been based on current market demand and industry trends from customers all around the world. We combine this input from our user base along with Swedish engineering, and have created a platform with increased productivity and functionality.

As always, we bring in our core values in our organization and products.
Power-Quality-Innovation-Durability-Reliability-Service/Closeness-Experience/Know-how

 

For more information about Scanmaskin product range and other press related questions please contact Anna-Lena Lööf, Marketing Director, anna-lena.loof@scanmaskin.com, +46 707 99 87 90

QR-code

qr-kod

From now on you can find a QR-code on all of our machines. When scanning the QR-code you get access to the right manual. This will make it easy to access the manual at anytime. You can find the QR-code on the machine plate.

If you have an Iphone:

  1. Open your camera
  2. Scan the QR-code
  3. Your web browser will automatically open up and you get access to your manual.

If you have an Android:

  1. Download a QR-code app on Google play to get access to your manual.
  2. Scan the QR-code
  3. A link to the manual will appear and you get access to your manual.

Scanmaskin experience technical issues with the telephone system at the moment We are working on resolving this problem as quickly as possible and apologize for any inconvenience this may cause.

New tool plates

We have now developed new tool plates for some of our Grinding machines. This is hardened tool plates which are casted in ductile iron. The tool plates are both easy to change and adjust depending on the surface and it is simple to attach the diamond segments.

This tool plates are now available for:

– Scanmaskin 18
– Scan Combiflex 450
– Scan Combiflex 500i samt 500PD
– Scanmaskin 28 World Series
– Scanmaskin 32 World Series

Soon these tool plates will be available for Scan Combiflex 650 as well

 

DSC00387

World Series

SC 32 side 1

World Series by Scanmaskin

“The development of World Series has been based on current market demand and industry trends from customers all around the world. We combine this input from our user base along with Swedish engineering” Says Martin Persson, Technical Manager at Scanmaskin Sweden AB.

World Series is a completely new line with high quality floor grinders, industrial vacuums and diamond tools where the design has been based on inspiration and knowledge worldwide.

The focus on this Premium line has been on the operator, where service, quality and reliability are some of the keywords.

First out in the World Series range is Scanmaskin 32, a floor grinder with a range of high-quality features that maybe makes this to the fastest and most modern grinder on the market. This floor grinder has a unique efficiency that minimizes the grinding hours to a tenth. The machine features cast alloy components along with a floating shroud, designed for years of durability and dust free operation. Scanmaskin 32 is constructed so that minimum amount of time is required for servicing the machine. With a smart design where you only release 3 screw sets you easily get access to the whole machine house.

“This machine gives the operator the greatest time gains, both in terms of efficiency and service life. This is “Grinding in the fast lane” for real” Says Martin Persson, Technical Manager at Scanmaskin Sweden AB.

World Series by Scanmaskin was launched at the fair “World of Concrete” in Las Vegas and Scanmaskin 32 quickly became a favorite among the visitors. A lot of people gathered in Scanmaskin’s showcases to look at the structure and technology of the machine. There were many visitors that tried out the Scanmaskin 32 and experienced the benefits of the machine on their own and the reactions were positive.

About Scanmaskin
Scanmaskin is a dynamic, progressive organisation based in Sweden. Since 1975 we have manufactured market leading floorgrinding-, surfacefinishing and polishing equipment.  All our grinders and dust extractors are produced in our facility in Lindome, on the outskirts of Gothenburg

The development of new machines has been based on current market demand and industry trends from customers all around the world. We combine this input from our user base along with Swedish engineering, and have created a platform with increased productivity and functionality.

As always, we bring in our core values in our organisation and products.
Power-Quality-Innovation-Durability-Reliability-Service/Closeness-Experience/Know-how 

For more information about Scanmaskin product range and pressrelated information please contact, Anna-Lena Lööf, Marketing Director, anna-lena.loof@scanmaskin.com / + 46 707-99 87 90

                                                                         SC 32 machine house bearings belt 2

We are excited to introduce the Scanmaskin 32, the newest model in our premium range of World Series grinders. The Scanmaskin 32 has a wide range of high quality features, making it one of the most robust and technologically advanced grinders in the industry.

The development of the Scanmaskin 32 has been based on current market demand and industry trends from customers all around the world. We combined this input from our valued user base along with Swedish engineering. We have created a platform with increased productivity and functionality. The result is the fastest grinder on the market with high productivity that significantly reduces overall labor spent on a project. This is combined with a longer service interval, saving you time and money while on and off the job site an efficiency that reduce the number of grinding hours to a tenth. This machine gives the operator the greatest time gains, both in terms of efficiency and service life.

The Scanmaskin 32 was designed with a focus on the operator. This is demonstrated by the ergonomic handle design, ease of use, and advanced features that provide real time feedback to the operator. The machine features cast alloy components along with a floating shroud, designed for years of durability and dust free operation. The Scanmaskin 32 is equipped with a new toolhead for better balance and tool support and a new electrical cabinet with an improved cooling system that new electrical cabinet with a sealed cooling system that protects the electrical components from heat and dust. The 370 mm wheels and the quick release makes it easy to operate and maneuver the machine manually.

From allowing the operator to be more productive on the job site to reduced down time for repairs and maintenance, the Scanmaskin 32 will help your business run faster – this is grinding in the fast lane for real.

https://www.scanmaskin.com/product/grinding-machines/scanmaskin-32/