SC-Close is our “pour filler”. This is a perfect binder to your grouting process of filling the pores in the concrete floor (and in concrete terrazzo). SC-Close can be used in different ways, but the best result is when we grout the floor in following procedure:
Use of SC-Close™:
1. Grind the floor with our Green tools, like BAUTA GREEN and then vacuum the surface carefully.
2. Mix the SC-Close with concrete dust from your grinding process (should be “clean” concrete dust without and residues) it is also possible to use cement-powder instead of concrete dust. (If you will use cement powder instead, you change one of the litres of water in the mixtures of 25-kilo powder to SC-Close). When you mix SC-Close to concrete dust, you mix it until you get a quite easy “floating” slurry. Use a “rubber squeezer” to apply the slurry on the floor in a thin layer, just to fill up the pores. Let it dry for approx. 10-12 hours.
3. Grind the floor again with Green tools, BAUTA GREEN and then vacuum the surface carefully.
4.Spray SC-Proof on the surface and let it cure for 10 hours before your next step of grinding.
10 litres / can