Enter your email address to download the grinding guide!

By sending this message you agree that we'll take part of the personal data you've chosen to share with us. Read more about our policy here.



+46 31 99 49 70

Fill the form and we will contact you as soon as possible!
By sending this message you agree that we'll take part of the personal data you've chosen to share with us.

Or would you like to send us a message?
By sending this message you agree that we'll take part of the personal data you've chosen to share with us.

By sending this message you agree that we'll take part of the personal data you've chosen to share with us.

+46 31 99 49 70

Fill the form and we will contact you as soon as possible!
By sending this message you agree that we'll take part of the personal data you've chosen to share with us.

I want to know more

By sending this message you agree that we'll take part of the personal data you've chosen to share with us.

SC-Shine™

SC-Shine ™ provides a high gloss, protective finish, makes the floor resistant to stains and reduces maintenance of the surface without the costs and preparation as other coatings. It also provides a dust-protected area. It is a cosmetic finish that can replace wax and acrylic sealant. SC-Shine ™ gives a similar look like a wax finish, but requires very little maintenance in comparison with a wax finish.

Use of SC-Shine ™:

1. Grind according to instructions.

2. Clean the surface thoroughly.

3. Work the SC-Shine ™ in a thin layer of the floor surface with a microfiber cloth. The appropriate amount is about 0.02 liters per sq.m.

4. Wait until the SC-Shine ™ has been absorbed and the surface is completely dry. Usually the drying time is about 20 minutes up to an hour, depending on temperature and humidity.

300 kr

Product description

SC-Shine ™ provides a high gloss, protective finish, makes the floor resistant to stains and reduces maintenance of the surface without the costs and preparation as other coatings. It also provides a dust-protected area. It is a cosmetic finish that can replace wax and acrylic sealant. SC-Shine ™ gives a similar look like a wax finish, but requires very little maintenance in comparison with a wax finish.

Use of SC-Shine ™:

1. Grind according to instructions.

2. Clean the surface thoroughly.

3. Work the SC-Shine ™ in a thin layer of the floor surface with a microfiber cloth. The appropriate amount is about 0.02 liters per sq.m.

4. Wait until the SC-Shine ™ has been absorbed and the surface is completely dry. Usually the drying time is about 20 minutes up to an hour, depending on temperature and humidity.

Technical specification

5 litres / can
Scanmaskin grinding guide
offert-block offert-block offert-block

Download our grinding guide!

Scanmaskin are a manufacturer of floorgrinding-, surfacefinishing and polishing equipment. We have a wide range of grinding and polishing machines and dust extractors.

CLICK HERE